Computer Assembly

• Disassemble 

1. First we have to open the computer case (there are many differents ways to do that).
2. Once opened remove the drives, first we removed cd-rom and then we removed the floppy disk drive.
3. Lastly extracted all drives´ cables attached to the keyboard then removed the ramp  by opening the clips that secure the RAM.
4. Next we remove the wireless internet card, we separated it from its case after that i disconnected the microprocessor .
5. Then check the microprocessor by releasing the letter.
6. And finaly desconnected the motherboard, disconnecting the  Aires.

• Reassemble 

1. First intall the motherboard. secure it conected various kid .
2. Then laid microprocessor back into its place and install the microprocessor fun.
3. Connect the wireless internet card sliding its casing into place and connecting card to the motherboard.
4. Next install the RAM inserted and lock iran into its slot on the motherboard.
5. After that we connected the hard drive then the floppy disk drive and then the cd-rom drive.
6. And finaly we close the computer case.

Diagram of the individual components of a computer.

Hard Drive

Microprocessor

Motherboard

CD-Rom

RAM

Computer´s Case